Tagged: measurement

3 Features That Define the Next Generation of Truck Scales

Dec 23, 2015 | | Say something

next generation truck scalesAs technology advances, truck scales are constantly under improvements. There are three specific features that define the next generation of truck scales. These are in-motion weighing, resilient design and construction, and software integration. Let’s look at what you can expect from this new generation of truck scales.

1. In-motion Weighing

In-motion weighing is not only an innovative feature, it is also a cost-effective option that will help you optimize your weighing processes. Weigh-in-motion truck scales improve efficiency for both you and truck drivers. In-motion weighing allows for the weighing of vehicles without the need of them stopping at a certain point. While they pass through a certain section of the road, they are weighed.

weigh in motion truck scales

The benefit of in-motion truck scales is that overloading is minimized. No truck will be able to avoid being weighed since the system is ingrained in the road. These types of scales are portable and can be installed in a few minutes. These advanced truck scales also measure the vehicle’s speed and the vehicle’s class. Once overloaded vehicles are kept off the road, the infrastructure is more protected and people’s safety in general is ensured to a certain extent. Collected data which is captured while the vehicle is in motion is very accurate making it an essential truck scale item that meets the highest of standards in the truck scale industry.

2. Resilient Construction truck scale weighbridge

A truck scale is worth nothing if it doesn’t withstand the trucks’ weight. For this reason, new truck scales are strongly built and are expected to last for many years to come. Truck scale manufacturers have to ensure the vehicles’ and the driver’s’ safety. For this reason, new and modern truck scales are built with top components making them a good investment in the long run. It will pay off many times over.

Some of the light-weight truck scales that are on sale in the market today are just as solid as permanent truck scales. What’s more surprising is that they can function in the harshest of conditions and have no need to be repaired. Calibration is also not needed. This shows the amazing resistance these scales have. They will be exposed to serious amounts of pressure, outside weather, etc. None of them will pose any risk for the scale’s survival. Most models are made up from either steel or aluminum.

3. Software Integration truck scale software

Gone are the days in which the data had to be collected manually. With truck scales featuring software integration, data can be saved and analyzed in no time. Data stored includes vehicle’s model, name of the driver, accumulated amount of total weighs, trucks’ serial numbers, data and time in which it was weighed, and other weigh records.

The usefulness of having software integration doesn’t stop there. Given that every process is automatized, monthly bills and payment can be sent or given easily to drivers who used the scale. All of this is known as a load management system. In short, the human labor component is eliminated making the process more economically efficient. Time is also saved as no manual info needs to be taken and no visual confirmation of the driver needs to be made.

All of these incredible features can be leveraged with truck scales offered by Walz Scale. To learn more about Walz Scale’s line-up of truck scales, visit WalzScale.com.

In-Motion Rail Car Scale Advances Industrial Weighing Operations

Apr 7, 2015 | | Say something

rail car loadIf you’re in a business that involves weighing heavy duty loads that are then distributed via rail transport, then keeping an accurate account of your freight can mean the difference between a successful company and a company losing revenue at every turn. This is why weight management is extremely important.

Industrial weighing operations are best managed with the utilization of a reliable rail car scale – a unique weighing system that will weigh rail car loads will assist in the management of those loads. Rail scales are weighing systems that will weigh loads while in motion on the train tracks is just intelligent business practice. Not only is it a convenient advantage, but it is an effective one. In contrast to regular weighing scales, in-motion weighing rail car scales are cost minimizing and huge time savers.

The system works in a portable or permanent fashion for the in-motion weighing of rail cars and locomotives. Embedded WIM algorithms in the weighing software and comprehensive design allow all rail assets to be weighed with accuracy. High quality grade materials are put in place to weigh the rail car’s load.

Here’s a video from one of the leading industry suppliers of rail weigh scale technology, Walz Scale:

Optimal Data Management

A key feature to the in-motion rail car scale is the advanced technology behind the management software. Being able to monitor the functionality of the scale, and managing the data collected is a major function of the software that comes with this particular form of weight management. Rail industry experts played a hands-on part in the incorporation of this software.

rail scale system

This means that this technology was imagined by the very people that would benefit from its use. These are the people that understand the urgent need to be provided with data that will make or break their business. Having a specific industry professional evaluate the needs of this particular business has made for a relevant and useful product.

Increase Throughput & Productivity

Verifying and balancing full car weighing is another reason this system advances the operation of industrial weight management. Increasing throughput and the rapid weighing of rail assets will help the bottom line. By eliminating the need to bring loads to a halt in order to weigh them, you in turn better your time management. Transported materials can continue on route and minimize the risk of being delayed, an occurrence that can be a negative impact on financial compensation.

Another cost effective feature is the portability factor. In as little as 30 minutes, axle rail scales can be installed and fully operational. The easy installation leaves out the need for track maintenance personnel. This of course is a major factor in the financial well-being of any industrial freight company.

rail car weigh scale unit

What can also be considered a cost saver is the fact that these rail weighing scales don’t have to be purchased for long term usage. Perhaps your needs are not ongoing. For customers who are only in need of a short term need for rail car weighing systems, rental units are available. This as-need option prevents the consumer from spending unnecessary increments of finance.

If you are an industrial professional that specializes in payloads, every dollar counts. Portable rail car scales provide accurate, real time, and reliable statistics that will help keep your business moving forward.

New Load Scanner Takes Payload Management to the Next-Level

Jan 20, 2015 | | Say something

The new volume load scanner system by Walz offers a comprehensive and accurate in-motion volumetric scanning solution that’s fast and simple to install and operate. If you’re interested in best-in-class load scanner technology, then look no further than latest Walz Load Scanner technology which is one of the best payload management and large-scale weighing solution.load scan imagery

Applicable to multitude of industries, this volumetric load scanner offers you real-time load volumes for in-motion trucks. Spanning from mining companies and resource aggregates to waste management and road construction, the load scanning system delivers world-class load scan technology suitable for wide range of applications. load scanner mounted

Standard Features of the Load Scanner

  • World-Class Technology
  • In-Motion Load Scanning Capability
  • Volumetric Systems
  • High Definition Load Images
  • Simple Setup of Platform
  • Low Maintenance Scanner Technology

How the Walz Volumetric Load Scanner Works?

This highly sophisticated system consists of a laptop or PC, 3D laser scanners and mounting hardware. The technology used in the load scanner has been developed to provide an affordable and highly accurate solution to customers interested in minimal setup costs and lower maintenance costs. You can see more by visiting the official site of the Walz Load Scanner at LoadScanner.com.

truck load scanner

The Volumetric Scanner system uses its very own Payload Pro Operating System. It’s an easy to use software platform that has real-time data and reporting capabilities to managers and operators and helps them effectively and efficiently manage their truck loads. Compatible on virtually all types of mobile devices and computers, operators can easily leverage the tools and capabilities of Payload Pro to track, monitor, and manage load scan data.

With the Volumetric Truck Load Scanner from Walz, operators will be able to view high definition 3D images of their truck loads. First, the trucks are scanned by the Volumetric Load Scanner while they’re empty. These scans are saved in the system. Once these trucks are loaded, the Volumetric Load Scanner system will again scan and calculate the actual carried volume of load. This is achieved by comparing the loaded scans with the stored empty scans in the system.

An Affordable Load Scanner System load scanner image

Walz Volume Load Scanner is an affordable payload management system as compared to other options available on the market, such as heavy-duty weighbridges and portable truck scales. In some cases, installing a load scanner system can cost less than half the cost of heavy-duty weighbridges while making your job site more simplistic, efficient and organized. This scanner needs minimal maintenance as compared to truck scale alternatives, minimizing costly repair and re-calibration costs.

Accurate Calculations

In operations where’s load’s cubic volume is the target metric, the Walz load canner delivers a accurate and reliable measurement that you can use. Unlike other types of valuation and payload management, the Walz scanner minimizes variables and uncertainties in compaction, moisture content and load variation. All in all, the Walz Volumetric Load Scanner system provides highly accurate volume calculations and completely eliminates any need for old school methodologies such as counting truck loads of simply guessing!

Optimized Efficiency and Throughput system integration

The Walz Volume Load Scanner system can be easily installed on your site and can start operating on the same day. Once in operation, it can make calculations just in seconds, and data can also be accessed remotely in real-time using company’s advanced software solutions. It is accessible from various types of mobile devices and computers and operators can easily manage the processes and access all payload data through highly intuitive Payload Pro platform.

If automated load management and optimizing processes is your primary objective, then the Walz Volumetric Load Scanner is the best possible solution.